Wooden Propeller Forum  

Go Back   Wooden Propeller Forum > Wooden Propeller Identification > "Modern" Wooden Propellers

Reply
 
Thread Tools Display Modes
Old 01-11-2017, 09:24 AM   #1
foxfire
 
Join Date: Jan 2017
Posts: 1
Default Mystery Propeller

I am attempting to identify the manufacturer of a small vintage wooden propeller. It appears to possibly be one used on a UAV and measures 24 inches from tip to tip with the tips being painted red with a yellow painted band inside of the red tips. It has a 2 inch diameter hole in the center with 4-1/4 inch flange holes. At the widest point the blades measure 2 3/8 inches wide. There is a number on the hub which is 10552-1. Any information which you could provide in identifying this propeller would be greatly appreciated.

Many Thanks,
James Manley
foxfire is offline   Reply With Quote
Old 01-11-2017, 10:04 AM   #2
Dbahnson
Administrator
Site Admin
 
Join Date: Nov 2008
Posts: 521
Default

They're usually pretty hard to identify with much specificity, but it certainly sounds like a typical " target drone" propeller used in the 1940s and 1950s. There were thousands of these sold off as surplus later on.

A picture might help, but I don't know of any reference to that design number, which might even just be a serial number.
Dbahnson is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:40 AM.


Powered by vBulletin® Version 3.8.9 Beta 3
Copyright ©2000 - 2017, vBulletin Solutions, Inc.