Wooden Propeller Forum  

Go Back   Wooden Propeller Forum > Design and Manufacturing > Manufacturers

Reply
 
Thread Tools Display Modes
Old 02-06-2006, 02:39 AM   #1
airscrew
Guest
 
Posts: n/a
Default How about a "making propeller" category?

Hello

During the chinese new year vacations (now over) I carved a very basic miniature propeller for my son. It was interesting to try it and improve the shape so that it flies better and better.
This triggered my desire to go bigger.
So I have started a 3 blades propeller that I intend to use in a windmill.

And searching on the web for more information on propeller design and manufacturing, I've found woodenpropeller.com and this forum.

Reading this lines, you will probably think: toys, windmill, ... what does it have to do with early aircraft propellers? Nothing in common or a lot in common depending on your point of view. But for sure they led my interest for more ambitious projects.

Now I am quite motivated to reproduce some real propellers. Maybe not full scale, maybe not a lot, but at least I would like to try.

Is there any woodworker on the forum that would be tempted also?

How about adding a category related to the actual manufacturing of a propeller, or its reproduction? It would deal with the design, the choice of material, the tools used, glueing, coating, ... This would broaden the topics of the forum and would open it to a wider public.

I'm not sure if my posting is releavant, but since the forum is quite new, it is a good opportunity to make this proposition.

Regards from Taiwan

Ludo
  Reply With Quote
Old 02-06-2006, 11:18 PM   #2
Dave
Moderator
 
Join Date: Jan 2006
Location: Vermont
Posts: 2,831
Default

Thanks for your suggestion. We are trying to keep the number of categories low, and most of the questions recieved fall into the area of identification. We did, however include a section on manufacturers (including techniques) and design, so I've taken the liberty of moving this post to that section.

This forum is only several weeks old, and rather than making a series of changes, I think it's best to just see where the interest is and consider re-designing things in 6 months or so.
Dave is offline   Reply With Quote
Old 02-15-2006, 09:30 PM   #3
Gazoo
Guest
 
Posts: n/a
Default

Airscrew,

I have always wanted to try my hand at carving a prop as well. I do not intend on creating an airwothy prop but one simply for display over my bar. That said, it has to be accurate with period detail including correct bolt pattern, leading edge metal, tip cloth etc. I have done some wood working and think I have the patience and skills.
I have searched the archives at my hometown museum, The National Museum of Naval Aviation, and talked to several volunteer a/c restoration experts without much success.
Finally came across this website which seems to have some very useful info to at least see what is involved. http://www.flyingflea.org/docs/WoodenProps.htm
Hope that helps and if you come across any good gouge, please post.

Gazoo
  Reply With Quote
Old 02-15-2006, 11:54 PM   #4
airscrew
Guest
 
Posts: n/a
Default

Thanks Gazoo!

Glad to know someone else interested in the job.

I had seen a guy selling this on ebay. I was almost going to buy the CD. Also I've seen some books on propeller design, but they are all out of print and not available anymore.

You can check this link:
http://www.wood-carver.com/store.html#books

Let us keep in touch on the forum on our progresses.

Ludovic
  Reply With Quote
Old 02-16-2006, 10:31 AM   #5
MWP_Lamar
Moderator
 
Join Date: Jan 2006
Location: Louisiana
Posts: 762
Default

I have found the website http://www.aeroplanebooks.com to be a very good source of out-of-print books on airplanes and related topics.
MWP_Lamar is offline   Reply With Quote
Old 10-04-2006, 11:07 PM   #6
chadifalls
Guest
 
Posts: n/a
Default I've made a few propellers

Hello everyone,
Just found this cool site today and noticed this posting for those looking to make their own propellers. I've made about 8 of them so far and I am looking at making a few more. They look really neat but are made out of a solid piece of pine. I now want to laminate my wood together just to get the real look. I have a sawmill up her getting me a laminated board of black ash and maple so that I can make a really cool propeller for my house.
What have you found that works the best for removing the extra wood at the blade ends? My propellers have been crudely carved with a sawsall and a Lancelot carving disc then sanded down to the pitch I drew out. takes a lot of time this way but is the best for me without purchasing a big amount of tools for now.
I would like to purchase a real antique propeller someday and was wondering what any of you would recomend for a midpriced propeller to start with.
Thanks for your attention and replies,
Chad
  Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:27 PM.


Powered by vBulletin® Version 3.8.9 Beta 3
Copyright ©2000 - 2017, vBulletin Solutions, Inc.