Wooden Propeller Forum  

Go Back   Wooden Propeller Forum > Wooden Propeller Identification > "Early" Wooden Propellers

Reply
 
Thread Tools Display Modes
Old 08-03-2006, 09:23 PM   #1
rocketman
Guest
 
Posts: n/a
Default Need to Identify 3 Blade Wooden Propeller

The Beech Staggerwing Museum in Tullahoma, Tennessee, recently received a large 3 blade wooden propeller for decoration in Old Hangar 7. Unfortunately, the donor did not have any info as to what type of aircraft the propeller was on. Any suggestions would be greatly appreciated. The propeller is an all wood [believe it is Mahogany] and approxiametly 8 foot in diameter. The blades have a simatar shape, and metal sheathing on the leading edges. There are 8 bolt holes on the mounting hub. No lettering or numbers can be found any where on the blades or hubs.

I have searched my rather large aviation library and have yet to find a 3 blade wooden propeller on any aircraft. I'm hoping the propeller experts can give me a clue to the identity of this propeller. Thanks guys.[/img]
  Reply With Quote
Old 08-03-2006, 11:57 PM   #2
Dave
Forum contributor
 
Join Date: Jan 2006
Location: Vermont
Posts: 2,832
Default

It's certainly a nice looking prop. The absence of any stampings may make it impossible to identify, but it does resemble (in shape and contour of the metal sheathing) one of the 3 blade Paragon propellers made during WW1. The non-circular shape of the face of the hub is unusual, and that might help narrow it down. Also, you could measure the hub dimensions and see if you can match it to an engine.
__________________
Dave
Dave is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:47 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.