Need Help to identify a wooden prop

04-06-2010, 09:14 PM

There are 2 numbers on my prop. 343 and also A1487. My prop is Oak, it is 8 feet long, it has 8 bolt holes, and the entire round of the blade is in worn copper. It has the Sensenich Bros., SB, Lititz, PA emblem on it on both sides of prop. I would REALLY appreciate any info on my prop and any idea of value. Kindest regards, George

Dave · 04-07-2010, 09:19 AM

It's impossible to even begin determining a value without knowing its condition. It's not a typical Sensenich model number nor is it typical for Sensenich props to be constructed from oak.

If it is exactly 96 inches (8 feet) in length, it should correspond to one of the models beginning with "96" on this page.

04-07-2010, 06:54 PM

Thanks for your timely response. I will take a picture of the prop and post it shortly. Thanks again.

04-06-2010, 09:14 PM	#1
jjalbert Guest Posts: n/a	Need Help to identify a wooden prop There are 2 numbers on my prop. 343 and also A1487. My prop is Oak, it is 8 feet long, it has 8 bolt holes, and the entire round of the blade is in worn copper. It has the Sensenich Bros., SB, Lititz, PA emblem on it on both sides of prop. I would REALLY appreciate any info on my prop and any idea of value. Kindest regards, George

04-07-2010, 09:19 AM	#2
Dave Forum Contributor Join Date: Jan 2006 Location: Vermont Posts: 2,832	It's impossible to even begin determining a value without knowing its condition. It's not a typical Sensenich model number nor is it typical for Sensenich props to be constructed from oak. If it is exactly 96 inches (8 feet) in length, it should correspond to one of the models beginning with "96" on this page. __________________ Dave

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-07-2010, 06:54 PM	#3
jjalbert Guest Posts: n/a	Thanks for your timely response. I will take a picture of the prop and post it shortly. Thanks again.