Announcement

Collapse
No announcement yet.

sensenich prop i.d.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • sensenich prop i.d.

    i have a sensenich prop that is 44" long, 3 1/2" thick,with a 6 bolt pattern hub.stamp on the prop is p/n 22048, model no.276-17,Serial No. 14633. Could someone tell me what this was used on. thanks
    Attached Files

  • #2
    That is a propeller for a target drone.

    Lamar

    Comment


    • #3
      This is interesting, I came here trying to ID my prop, it has the same part # and model # as the one above but is a 3 blade... serial # 100902...
      Each blade is 22" so I assume it would also be considered a 44" prop...

      Comment


      • #4
        That is interesting. Your three blade prop should have a different designation. Can you post pictures of it too?

        Lamar

        Comment


        • #5
          Turns out it was some pretty good creative carving by someone... It started out as a couple of 2 balde props... Doesn't matter though since it's only for decoration...

          Comment

          Working...
          X